links to the published paper ·
open access.
Numbering matches the CV. A full list is also on
Google Scholar.
Journal articles
-
J12
Benchmark dataset from centrifuge shake table tests of 3D-printed URM structures for seismic model validation.
Earthquake Spectra, 2026; 42(1):e70042.
-
J11
Shear behavior and centrifuge seismic modeling of a sustainable corbel dwelling with interlocking blocks.
Construction and Building Materials, 2026; 515:145553.
-
J10
Impact of beam-column joint modeling uncertainties on the seismic response of low-rise RC frames.
Earthquake Engineering & Structural Dynamics, 2025; 54(12):e70024.
-
J9
Cyclic behavior of physical models of reinforced concrete columns built with additive manufacturing.
Journal of Structural Engineering, 2025; 151(5):04025043.
-
J8
Small scale physical modelling of reinforced concrete joints using additively manufactured reinforcement.
Journal of Structural Engineering, 2025; 151(5):04025036.
-
J7
Additively manufactured steel reinforcement for small scale reinforced concrete modeling: tensile and bond behavior.
Materials and Design, 2024; 241:112919.
-
J6
Effect of ground motion processing and filtering on the response of rocking structures.
Earthquake Engineering & Structural Dynamics, 2023; 52(6):1704–1721.
-
J5
Cyclic nonlinear modeling parameters for unconfined beam-column joints.
ACI Structural Journal, 2022; 119(1):89–104.
-
J4
Probabilistic beam–column joint model for seismic analysis of concrete frames.
Journal of Structural Engineering, 2022; 148(4):04022011.
-
J3
Seismic behavior of ultra-high performance concrete elements: state-of-the-art review and test data trends.
Journal of Building Engineering, 2021; 40:102572.
-
J2
Database trends and critical review of seismic performance tests on high strength steel reinforced concrete components.
Engineering Structures, 2021; 239:112092.
-
J1
Performance-based seismic assessment of buildings with curved shear walls.
Engineering Research Journal, 2019; 164:178–192.
Under review
- U1 Blind prediction contest on shake table tests of a masonry model: results with and without structural identification. Earthquake Engineering & Structural Dynamics. Under review
In preparation
- P3 A bimodular formulation for topology optimization of reinforced concrete structures under nonlinear seismic demand. Computer Methods in Applied Mechanics and Engineering. In preparation
- P2 Additive manufacturing for fast prototyping of topology optimized designs of reinforced concrete. Additive Manufacturing. In preparation
- P1 Centrifuge shake table tests on rolling isolated masonry model structures. Engineering Structures. In preparation
Conference papers
-
C12
Centrifuge modelling of URM seismic response using sand-based 3D printing.
11th International Conference on Physical Modelling in Geotechnics (ICPMG 2026), Zurich, Switzerland, 2026.
-
C11
Physical modeling of reinforced concrete structures with 3D-printed steel cages at centrifuge scale.
11th International Conference on Physical Modelling in Geotechnics (ICPMG 2026), Zurich, Switzerland, 2026.
-
C10
Applications of 3D printing for manufacturing small-scale physical models of reinforced concrete structures for centrifuge use.
6th Panhellenic Conference on Earthquake Engineering and Seismological Techniques, Athens, Greece, 2025. (In Greek)
-
C9
Assessment of 3D printed RC beam-column joints models for centrifuge modelling.
1st Hellenic-Italian Conference on Computational Mechanics, Biomechanics and Mechanics of Materials (HICOMP 2025), Rhodes Island, Greece, 2025.
-
C8
Seismic behavior of URM structures: a centrifuge model study.
International Conference on Structural Analysis of Historical Constructions (SAHC 2025), Lausanne, Switzerland, 2025.
-
C7
Preliminary centrifuge tests on unreinforced masonry buildings built using a sand-based 3D printer.
4th Asia-Pacific Conference on Physical Modelling in Geotechnics (ACPMG 2024), Abu Dhabi, UAE, 2024.
-
C6
Enhancing centrifuge-based physical modeling of reinforced concrete with 3D printed reinforcement cages.
4th Asia-Pacific Conference on Physical Modelling in Geotechnics (ACPMG 2024), Abu Dhabi, UAE, 2024.
-
C5
Centrifuge-based physical modeling of reinforced concrete using 3D printed reinforcement cages.
5th European Conference on Physical Modelling in Geotechnics (ECPMG 2024), Delft, Netherlands, 2024.
-
C4
Small scale physical modeling of reinforced concrete using 3D printed steel reinforcement.
18th World Conference on Earthquake Engineering (WCEE 2024), Milan, Italy, 2024.
-
C3
Do ground motion processing and filtering affect the behavior of rocking structures?
18th World Conference on Earthquake Engineering (WCEE 2024), Milan, Italy, 2024.
-
C2
Ground motion processing in rocking structures.
9th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2023), Athens, Greece, 2023.
-
C1
Material testing of micro-concrete and 3D-printed reinforcement for use in small-scale seismic testing of RC structures.
9th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2023), Athens, Greece, 2023.
Datasets
Invited talks
- 2026 Making structural engineering more predictive, more sustainable, and more accessible. EERI Journal Club, EERI Student Chapters of Polytechnique Montréal, Purdue University and McGill University, online. Scheduled
- 2026 Additive manufacturing for benchmarking and uncertainty reduction in structural engineering. iMMEC Internal Mechanics Seminar: Modeling, Experimentation, Computation, Massachusetts Institute of Technology, Cambridge, MA.
- 2025 Validation of system-level assumptions in seismic analysis of RC and masonry structures: an experimental framework. ETH Zurich Geotechnical Centrifuge Center Inauguration Event, ETH Zurich, Zurich, Switzerland.
Conference presentations
- T3 Propagation of RC beam-column joint modeling uncertainty to the seismic performance of RC buildings using incremental record-wise LHS. Engineering Mechanics Institute Conference and Probabilistic Mechanics & Reliability Conference (EMI/PMC 2024), Chicago, IL, USA, 2024.
- T2 Validation of system-level assumptions in seismic analysis of RC structures: an experimental framework based on 3D printing of the reinforcement. Engineering Mechanics Institute Conference and Probabilistic Mechanics & Reliability Conference (EMI/PMC 2024), Chicago, IL, USA, 2024.
- T1 An experimental framework for statistical validation of system level assumptions in seismic analysis of RC structures. 21st Swiss Geoscience Meeting, Swiss Academy of Sciences, Mendrisio, Switzerland, 2023.